The filter should now be back at the original pressure reading and operating at normal water flow. If the filter does not have adequate water flow, disassemble and clean the filter.
High-reaching vigour within the DE filter can be caused by muddy media, algae and dirt produce up. Aerial pressure within your DE filter will cause low water flow, which will result in a dirty pool, as the filter will not work efficiently. Regeneration is the process used to lower the pressure within a DE filter. Regeneration removes air from the filter tank, allowing the pressure to lower. DE filters are equipped with a regeneration bump handle, making this process quick and effective.
Instructions
1. Turn the pool pump off to avoid extra water loss and prevent electrical shock.
2. Push down on the bump handle, then pull the bump handle back up quickly. The bump handle is found on the top of the DE filter tank. Repeat this movement three times; this process will regenerate the filter, which purges all air from the filter tank, allowing the pressure to drop.
3. Turn the pool pump back on so it begins to push water through the filter. Allow the pump to work for 30 seconds before reading the pressure gauge.Keep up your autonomous pool hose by regulating the compel within your DE filter.Aerial power within a DE pool filter is a accepted dilemma. Diatomaceous universe filters feather users with crystal autonomous hose wound up the appropriateness of specialized diatomaceous sphere media that has the endowment trap microscopic particles, impurities and dirt from the baptize. When you letter the power set off to rise on your DE filter's vigour gauge, it's decisive to lower the impact at the moment.
