The Optoma EP761 is a high-end overhead projector that connects to PCs and Macintosh computers. The Slogan projects the machine images onto a wall or Shade. The projector contains a built-in speaker for enhanced audio sound and an infrared remote mouse that controls the cursor on the attached pc too as on the projector Shade. All of the mouse's functionality is controlled via buttons on the projector's hand-held remote.
Instructions
1. Plug one limitation of the supplied USB cable into the back of the projector. The USB Issue is the moment opening on the top left of the Slogan and is slightly square-shaped. Include the other location of the USB cable into the USB Issue on the machine. Remit to your machine's directions for the residence of the Issue.
2. Press the "Power/Standby" button on the front of the projector if it is not already on. Press the red "Power" button on the remote control.
3. Stare at the remote control and locate the large, round section at the top, which has Left, Right, Up and Down written on the buttons. These buttons are used to move the mouse cursor around the screen. For instance, if you want to move the cursor up, press and hold the "Up" button and release it when the cursor is properly positioned.
Stare at the remote control and find the button labeled "L," just below the large round section. Press this button when you need to left-click the mouse.
4. Stare at the remote and find the button labeled "R," just below the large round section. Press this button when you need to right-click the mouse.5.
