The Xerox 5614 copier can clinch up to 375 sheets of paper in Everyone of its two input trays and cause up to 14 jet and immaculate copies per minute. The copier uses toner, or powdered ink, to actualize copies, applying heat and coercion complete rollers inside the mechanism before ejecting the copies into the output tray. Generally the copier's exhibit Shade Testament come across you alerts concerning decided problems, helping you to be schooled proceed with your troubleshooting.
Instructions
Black Spots on Copies
1. Dampen a microfiber cloth lightly with drool. Lift the copier's top involve to expose the scanning glass.
2. Disinfected the scanning glass with the cloth, then Disinfected the inside of the involve. Dry the glass and inside of the comprehend with a dry microfiber cloth before closing the contain.
Fold down the copier's front cover and press the green lever to the right. Lift up on the top portion of the copier to disclose the inside of the device and allow the copier to cool off for 15 minutes.8. Pull out any stuck pieces of paper you see inside the device.
4. Fold down the Xerox 5614's front encompass. Press the growing plastic lever to the honorable side of the copier as you lift up on the top collection of the copier.
5. Press the developing tab near the toner cartridge to remove it from its slot in the copier. Remove all of the wrappings from the cutting edge toner cartridge, then press it into place in the copier so the green tab near the cartridge snaps.
6. Close the printer so the green release lever snaps and fold up the front cover.
Paper Path Jams
7.3. Gaze the autochthonous string you used for the copies. Provided you good buy the identical coal spots on the embryonic, capitalization corrective fluid or tape to contain the spots before creation aggrandized copies.
Remove any stuck paper from the fuser by lifting up on the green plastic lever as you pull the paper out. Be careful to not touch the fuser, since it could be extremely hot.
9. Push the top of the copier closed until the green release lever snaps. Fold the front cover back into place and continue using the copier.
10. Remove all of the paper from the input tray and flip it over. Reinstall the paper stack in the tray, making sure the width guide is adjusted to the size paper you have put in the tray.
11. Replace the paper in the input tray with paper from a previously unopened package if you continue To possess paper path jams.
