Carpeting on stairs can abbreviate sound.
Carpeting your stairs can chop the bellow of footsteps and can add an Component of safety and consolation to your stairs. Floor-mat can and serve to tie well-organized rooms and floors, adding a licensed decorator's touch to your territory. In most cases, the riser is approximately 7 1/2 inches high. Treads usually measure 8 to 10 inches deep. If the measurement is 17 1/2 inches, round the overall stair-measure up to 18 inches.
1. Degree the overall Breadth of the stair treads. Round the measurement up to the nearest foot. For instance, whether the wideness measures 34 inches, round it up to 36 inches or 3 feet.
2. Deposit the point of the tape at the mould of the riser. Flow the tape up the riser and over the top of the tread to the next riser base. This is called the stair-measure. When calculatang how yet Floor-mat you commitment, degree the treads and the risers. The tread of the stair is the horizontal lot where you area your feet on the stair. The riser is the vertical Component of the stairway.
Instructions
3. Multiply the number of stairs times the stair-measure. For instance, if the number of stairs is 10, multiply that times 18 inches, to receive a total length of 180 inches. Divide 180 inches by 12 inches to find the total length in feet, which is 15 feet.
4. Calculate the square footage of the stairs. Multiply the width in feet times the total length in feet. For instance, 3 feet times 15 feet is equal to 45 square feet.
5. Find the square yardage of carpet required. Carpet is generally sold by the square yard. There are 9 square feet in every square yard. Divide the overall square footage by 9 square feet. The result is the amount of carpet required for the stairs. In the example, 45 divided by 9 is equal to 5 square yards of carpet.
