Brother ink cartridges come in a unit of deviating styles, depending on the design and the year of the printer that uses them. Cherish many manufacturers' ink cartridges, they can be refilled rather than replaced---saving you process by using an inexpensive refill apparatus instead of buying a brand-new cartridge. Considering how regularly a common work needs to replenish printer ink, refilling rather than replacing ink cartridges can translate to thousands of dollars saved per year.Inkwell Location
Once you be cognizant what colour you want, bonanza the stop of the ink refill gap, which varies depending upon the pattern of Brother cartridge you're refilling. The gap in the cartridges for the 5000 and 7000 series models is located under the title that is on top of the cartridge. For the LC02, LC04, LC21, LC31 or LC800 cartridges, you'll desideratum to gently pry off the top of the cartridge with a screwdriver, a penknife or a dispatch opener to jewel the gap.
The steps vary by cartridge nevertheless aren't backbreaking to result once you cognize how it's done.
Color
Before you refill the ink in the Brother cartridge, front arbitrate what colour ink is required. Most Brother ink cartridges include a unmarried inkwell holding one of four colours of ink---black, cyan, offensive or carmine. (One cartridge of Everyone colour is placed in the printer, and the colours can be combined in the printing modus operandi to constitute any colour in the spectrum.) The ink colour should be famous on the cartridge's term or be indicated by the colour of the plastic moulding on the cartridge.With the LC41 and LC900 cartridges, you'll charge to drill a gap in the bright bite of the plastic, approximately 1/4 inch from the top. (Most ink refill kits include thumb drills.) LC51 cartridges require you to remove the cartridge case and pierce the ink bag with the refill needle, then use aluminum tape to cover the hole. (Some ink refill kits contain aluminum tape, but with others you will need to buy the tape separately.) LC61 and LC65 cartridges are not refillable and instead should be replaced.
Refilling and Closing
Once you have access to the hole, fill the needle included in the refill kit with the proper color ink and insert it into the hole. Gently depress the plunger and fill the inkwell slowly. If the Brother cartridge has an ink exit hole moreover to the ink refill hole, use a piece of Scotch tape to cover the exit hole beforehand; this will prevent the ink from spilling out. Monitor the ink level carefully and make sure there's no overflow. (You don't need to fill the inkwell to the top in order for it to work; 3/4 full is fine.) When you're done, tape over the hole if you have drilled one, replace and secure the cartridge casing with tape, place the cartridge back in the printer, and run the printer one to three times to make sure the ink is flowing properly.
