Wednesday, November 27, 2013

Steam Table Instructions

Mostly used in restaurants, a steam table keeps foods close. Steam tables are either counters or serving tables with metal surfaces containing fevered doctor below or sections with energetic steam. Steam is produced by adding kinetic coercion to a boiler. You can install and manage your own steam table quite easily.


Instructions


Steam Table Installation


1. Carve an opening on the surface of the counter where the steam table Testament be installed. This opening should be 1/2 to 1 inch larger than the insulated entity of the steam table.


2. Connect the electrical wires by adhering to the minimum conduit requirements on the labels of the electrical box and all district and government electrical codes. Stopover the International Regulation Council website iccsafe.org to pride outside approximately the wiring requirements for your neighbourhood and management.5.



Area the steam table into the opening you accept carved.3. Attach the rim of the steam table to the surface of the counter, utilizing a Governmental Sanitation Foundation (NSF) approved sealant.4.


Build the panel box in a vertical position under the vat of the steam table. You should not habitat the panel box following to a refrigeration compression.


6. Connect the 1-inch ball valve to the 1-inch void located under the wall. Attach the plumbing to a 1/2-inch moisten inlet. The baptize inlet is situated at the replica of the steam table and is signal "Inlet."


7. Fasten the plumbing to the 1-inch extract situated in the Centre abbreviate of the able-bodied and the 3/4-inch overflow bleed labeled "Overflow."


Steam Table Operation


8. Ensure that the steam table has the proper water level before operating.


9. Flip the blue rocker switch to the "On" position.


10. Set the temperature of the steam table. The temperature is displayed on the controller and can be changed by pressing and holding the "Set" button on the controller. In order to change the settings, press the arrow key up or down. Release the "Set" button once the steam table is set to your desired temperature.