The symmetry of decorative concrete floors was matchless likely provided the floors were poured when the residence was built. On the other hand, advances in concrete technology accept untrue it viable to award existing floors a coating that looks and behaves enjoy concrete. With some products, it is all the more likely to pour these concrete-like floors over wooden flooring.
Instructions
1. Choose the prerrogative products for the work. Accomplish decided the topping can be used with wood. Assorted manufacturers assemble toppings that are recommended for bag single over a concrete subfloor. At rent one manufacturer, Colormaker Floors, produces a topping that can be used over wood. Adjust definite the cement board is compatible with the topping and the wood subfloor. Hardiplank works husky for this all heart of project. Choose the 1/2 inch thickness.
2. Screw the Hardiplank panels to the floor. Call one screw at Everyone speck noted on the panel.
3. Exercise mesh tape to involve the seams between the panels. Then trowel a thinset mortar over the tape. Let the mortar dry for Day and night.
4. Call a garden sprayer to application the primer. Supersede the manufacturer's directions. Let the primer dry completely. Apply a second coat as needed.
5. Prepare the topping according to the manufacturer specifications. Work in one small area at a time. You should be able to arrive across the area easily. Start in the corner opposite the doorway and work backwards toward the door.
Start in the far corner of the room and work backwards toward the door. Wear the knee boards so that you don't leave dents in the topping. Smooth out your tracks as you back out of the room.8. Let the topping dry for at least Day and night. If you want to color the floor, apply two coats of acid stain according to the manufacturer's directions. It will take an hour or so for the color to develop.
6. Pour a few cupfuls of the topping onto the floor. Immediately smooth the product with the floor gauge roller. Work as quickly as possible.7. Let the topping mixture stiffen. Then trowel it smooth with the pool trowel.
9. Neutralize the acid as the manufacturer recommends. Rinse with water several times. Use a shop vacuum to remove all the water. Let the floor dry completely.
10. Apply a concrete sealer to the floor, and let it dry completely. You can then wax the floor if you choose.
