2. Hold one end of the chalk line at the beginning of the location for the new painted factory line and have your helper take the other end to where the line will stop. Tighten this chalk line between you and both snap the taught line onto the surface of the floor, leaving a clear straight line.
Many companies sell Accoutrement trumped-up for the ambition of forming these types of lines nevertheless they can be done easily Sufficiently with a few items and a can of paint.
Instructions
1. Clean the floor and remove all dirt and grease from the surface to be marked.
Factories location lines on the floor for safety reasons and to ease the grind be done enhanced efficiently.Factories can be hustling grindstone areas that may keep multiple stations in the manufacturing development. A hale organised works may dub undeniable areas for Everyone bother. Marking the floors with fine defined stain lines can cure create meaning elsewhere the mechanism and corrective Industry and Employee delight. Move both ends of the line over 2 inches and snap again against the floor.
3. Mask off the lines with the tape on the outside edges of the chalk, leaving a 2-inch gap between each tape line for the paint line. Press the tape firmly into place along both chalk lines with the edge of the cardboard as you go.
4. Pour the paint into the paint tray and apply onto the bare factory floor along this tape template you have made. Use the paint roller and be sure to keep the paint off the floor on the outside of the tape. Let this dry according to instructions before applying a second or third coat.
5. Remove the masking tape when the paint lines have cured completely. Cut the tape out with the razor knife if the paint is sticking to it too much.
