The installation fashion is no sweat, and the filter automatically begins filtering the saturate once connected to the hose advantage edge. The manifold attaches to the string between the aqua supply and the icemaker, and it remains firmly in place throughout use. The filter cartridge screws off or on for easy replacement, and it includes a sticker To admit you to write down the filter installation date.
At the hour of jotter, the GE GXRLQ is the onliest SmartWater filter operation available that attaches to your family's GE icemaker to supply filtered drench and harden. The GXRLQ provides a twist-and-turn installation point for swift installation, and reduces direction, cysts, atrazine, lindane, chlorine and Dregs from the H2O servicing.
Installation
The Common Electric SmartWater drinking flood filter is an trappings for your existing GE refrigerator or icemaker that attaches to your inundate service contour to eliminate minerals and chemicals commonly establish in tap irrigate. It is compatible with the GE icemaker when properly installed. The SmartWater saturate filter maintains clean-tasting hose for up to 6 months or 750 gallons of H2O once installed, and it requires a replacement to preserve filtered doctor for the icemaker.
Models
The water supply line must be disabled prior to installing the water filter, as water may leak during the installation process if the line is not turned off.Preparation
The water filter requires flushing once it is installed to clear out carbon found in the filter. Adequate flushing consists of five minutes of water filtration or 4 gallons of water dispensed. The SmartWater is flushed by turning on the water supply line and pressing the water dispenser inside of the icemaker. Once flushed, the icemaker and the water filter are ready for use.
Maintenance
Turning off the water supply line and replacing the water filter's cartridge should be done after six months. Once disabled, water is unable to pass through the line, allowing for easy removal of the filter cartridge by twisting off the cartridge. Insert a new cartridge into the manifold and turn on the water supply line. Flush the line prior to using the icemaker, and write down the new cartridge replacement date on the filter cartridge's sticker.
