Priming your plywood before picture helps you to employment less tint.
Signage plays a identical chief role in advertising for your livelihood. Customers ofttimes excite their inceptive conception of your partnership and the factor of your goods and services simply by seeing your signage from the pavement or the street. A know onions communication with your craft appellation and logo can easily reward thousands of dollars. Signage, but, can be designed and painted as a do-it-yourself project inexpensively and easily, provided the hold up techniques are used to assemble the signage observe finished.
Instructions
1. Decide how sizeable you require to assemble the signage. Compass your resident internal improvement store reduce the plywood to vastness before buying it, or reduce it with a axiom.
2. Shake the can of acrylic primer. Clutch it six to eight inches from the plywood, and spray a thin coat covering the wood. Permit it to dry for 30 minutes and repeat with a moment coat.
3. Capitalization the tape degree to bargain the center of the plywood. Mark the center with your pencil. This will help you lay out the business name and logo on the sign.
4. At the top of the sign, measure 1/4 down the sign. This is where your name will go.10. Shake the can of acrylic spray varnish well, and remove the lid. Hold ten to 12 inches from the sign, and spray a thin coat of varnish across the entire sign.
Use the pencil to draw one letter in each square. You may want to use stencils for the lettering.
6. Tape a large picture of your logo on top of a piece of carbon paper on the bottom section of the sign, and trace the logo with your pencil.
7. Remove the logo and carbon paper.
8. Fill in the background of the sign with paint, and allow it to dry for at least two hours.
9. Use a contrasting color of paint to fill in the lettering and logo. Allow to dry for two to four hours.
Count the number of letters in your business name, and measure out that number of sections across your plywood. Use the t-square to sketch in the grid.5. Allow to dry for at least an hour. Repeat with two to three more coats. Allow to dry overnight before mounting.
