When your Xerox 5328 copier runs gone of toner or alerts you to a low toner common, it can render your copier dysfunctional until you modify the cartridge. You committal to change the toner cartridge equitable outside to deposit your copier up and running, expressly provided your job relies on it. You can pennies the toner cartridge in your copier in minutes without the longing for a Xerox technician or a specialist.
Instructions
1. Allot the bypass tray. The bypass tray is the top output tray on the true side. Lift up on the bypass tray, then pull it elsewhere toward you to remove it from the copier.
2. Pull down the comprehend on the genuine side of the copier to frank the printer. Grab the practice on the toner clutch tray and slide it straight away of the copier. Corner a chapter of paper underneath the tray while you slide it outside to avoid spilling toner. Avoid tipping the receive tray when you remove it.
Insert the catch tray, holding the sheet of paper beneath it, until it clicks into place.5. Close the cover on the side of the copier. Insert the bypass tray into the mounting slots. Open the new toner cartridge and shake it sideways 20 to 30 times to distribute the toner. Take the rubber band off the toner cartridge.
4. Turn the internal drum on the cartridge until the arrow points toward the label marked with "J2." Slide the cartridge into the copier.3. Rotate the toner cartridge down until it stops. Pull the toner cartridge outside of the copier.
