Uplug the gift, go another Issue and press "Capacity" again.
ViewSonic projectors ride on AC potency without the capitalization of an adapter to transform the effectiveness overhaul to DC. This eliminates AC/DC adapter failure as a potential element of problems. By reason of projector lamps influence decalescent, ViewSonic projectors add cooling fans which pace for a hour after the light is turned off. This transaction can be misinterpreted as a capacity problem---pressing the "Faculty" Press-stud doesn't shut the efficacy down. This and other power-related issues can be identified by troubleshooting.
Instructions
1. Test that the capability cable is connected securely to both the projector and the wall, provided the influence won't turn on. Press the power button again and hold it down for a few seconds. If you continue To possess problems turning the ViewSonic projector on, unplug the power, try another outlet and press "Power" again.
5. Allow the ViewSonic projector to cool down after use. Pressing the "Power" button turns off the lamp, but the fan continues to run. This is a normal part of the cooling process, not a power failure. Take the lens cap off, or make sure the lens cover is open, if the screen won't illuminate with the presentation.
3. Stare at the LED lights on the display for errors. A solid green power light and a solid red power light indicate that the fan has failed and will not cool the projector. For safety reasons, the projector will not power up since case---service the projector.
4. Change the batteries in the remote control if its power button fails to turn on the projector. Remove the battery cover and insert new batteries ensuring the positive (+) and negative (-) icons are properly aligned. Make sure nothing's blocking the remote. Point it at the projector, not the screen.
2. Look for lights on the projector. Illumination indicates power is supplied and that there isn't a power failure. Don't unplug the power cable to force a shutdown.
