Thursday, August 15, 2013

Glass Polyester G10 Specifications

Glass polyester G10 is used to fabricate windscreen wiper arms.


Glass polyester G10 is created buttoned up a manufacturing manner in which polyester is added to glass fibre to transform the elasticity, flex, compression, elongation, hardness, particular gravity, moulding and expansion properties of the glass. The type of polyester used is thermoplastic or thermoset polycondensate, which is commonly marketed as Valox or Celanex. The glass polyester produced during this method is divided into seperate grades based on performance characteristics. One grade of glass polyester is G10 which includes Ultradur B4040 G10 BK5110, Ultradur B 4040 G10 Great Hurry BK15029 and Ultradur B 4040 G10 LS Colossal Velocity BK 15029.


Forms and Applications


Glass polyester G10 is produced in many forms that contain sheets, rods and tubes. The info is used for a array of applications in Everyone of its forms. Examples of automotive applications append automotive exteriors, door handles, exterior mirror housings and windscreen wiper arms. This product is too used for printed direction boards and related housings, consoles, carriers and covers.


Ultradur B 4040 G10 BK5110


Ultradur B 4040 G10 BK5110 is make-believe of glass fibre and polyester additives in a 50/50 assortment. The product is used for practical parts that charge reinforcement and a bad surface Stop. The physical properties of the product build in a density of 1.73 g per cubic centimetre and a viscosity of 97 cubic centimetres per gram. Its saturation proportion is 4 percent. The mechanical properties of the product, measured at 23 degrees Celsius, allow for 16,500 megapascal tensile modulus, 155 MPa tensile compel, 1.5 percent tensile strain at the breaking site and 255 MPa flexural force. Its flexural modulus is 15,000 MPa. The melt notebook ratio is 6 cubic centimetres per 10 minutes at a temperature of 275 C. Izod notched compel measurements scope between 8.2 kilojoules per square metre at 23 C and 8.1 kJ per square metre at -40 C. The charpy notched crunch ranges between 10 kJ per square metre at 23 C and 8.5 kJ per square metre at -30 C. The mechanical properties of the product, measured at 23 C, include 18,700 MPa tensile modulus, 170 MPa tensile stress and 1.4 percent tensile strain at the breaking point. The melt volume rate is 110 cc/10 min. at a temperature of 275 C. The charpy notched impact is measured at 10 kJ/m^2 and the charpy unnotched measurement ranges between 60 kJ/m^2 at 23 C to 64 kJ/m^2 at -30 C.



The saturation ratio is 0.4 percent. Mould shrinkage on the paralell and average is 0.3 percent and 0.8 percent respectively. The mechanical properties of the product, measured at 23 C, consist of 18,400 MPa tensile modulus, 150 MPa tensile stress and 1.2 percent tensile strain at the breaking point. The melt volume rate is 130 cc/10 min. at a temperature of 275 C. The charpy notched impact is measured at 10 kJ/m^2.


Ultradur B4040 G10 LS High Speed BK15029


Ultradur B 4040 G10 LS high speed BK15029 are used for industrial parts that need to be tough and stable. The physical properties of the products include a density of 1.76 g/cc and a viscosity of 75 cc/g. The unnotched charpy encounter ranges between 52 and 69 kJ per square metre at the alike temperatures as the charpy notched.

Ultradur B 4040 G10 High Speed BK15029

Ultradur B 4040 G10 Colossal Precipitation BK15029 is used for industrial parts that desideratum to be hardy and steady. The physical properties of the product count a density of 1.76 g/cm and a viscosity of 75 cc/g.