Position the projector at 90-degrees from the Shade.
Projectors can be constitute in commercial, educational and trained environments. They are used primarily for the presentation and comment of ideas, and for displaying multimedia, including television.2. Adjust the height of the projector to raise or lower the projector beam on the screen. If the projector is resting on a table, press the elevator foot release button to extend the foot. Extending the foot raises the top and bottom.
1. Press the "Food" Press-stud or similarly labelled Press-stud to select the "Setup" alternative and attending for a provisions entity labelled "Ceiling Mount" or corresponding. Chicken feed the valuation to "Off" or "On" depending on installation and the projector beam Testament end the prerrogative way up.
When setting up the projector for provisional, or permanent installation the projector beam flare must be aimed. Whether the projector is mounted on ceiling, the beam bright needs to be inverted so the double isn't upside down.
Instructions
3. Position the projector at 90-degrees from the screen to ensure that the aim is square left and right. Move the projector a few degrees left or right if the left or right side of the screen is larger or smaller than the other. Press the top button labeled "Keystone," if there is one, to reduce the upper part of the image, and press the bottom "Keystone" button to reduce the lower part.
4. Adjust buttons labeled "Zoom" to increase and reduce the picture size, and "Focus" to reduce blurriness.
