With a stain sprayer, you can quickly subsume a surface with a smooth urethane coat.
A urethane Stop over an item provides a solid protective layer that can prevent damage to the covered body while besides creating an appearance of Profundity to the thing's stain or Stop. Urethane is a luminous substance, allowing you to idea what it covers without obstruction, and typically comes in three finishes, high-gloss, semi-gloss or satin. You can handle the twin spray-on practice advance with Everyone Stop type, saving generation with a high-volume, low-pressure (HVLP) sprayer instead of a brushed operate.
Instructions
1. Settle a Blop cloth onto the floor of your business globe to protect the floor from urethane overspray. Govern all windows and doors to supply comprehensive ventilation to the earth for Safeguard from the urethane fumes. Wear safety goggles and a dust mask for fresh Safeguard against the urethane mist. Deposit masking tape over any quota of the entity you don't ambition covered with the urethane.
2. Area a piece of wood planking onto the drop cloth that's large enough to hold the entire base of the object. Center the object that you're spraying with the urethane onto the drop cloth, atop the panel. By elevating the object, you'll be able to receive all of the edges of the base cleanly with the urethane.
3. Allow the urethane a final 24-hour drying finish before moving your object.
Aim the nozzle of the spray gun towards the object, about 12 inches from the surface, and trigger the sprayer to start the flow of urethane. Cover the object with the urethane, beginning the spray of material from slightly outside the object's area, then passing over the object to a point slightly off the opposing side. Allow the layer of urethane finish 24-hours drying time.
5. Sand the urethane smooth with a fine grit sandpaper. Wipe away any sanding residue with a tack cloth, and then spray on a second layer of urethane. Dry for Day and night then repeat the sanding process. The additional layer of urethane combined with sanding each layer results in a glossy finish. Open the can of urethane and stir with a wooden stir stick until it's of a uniform consistency. Fill the paint reservoir of a HVLP paint sprayer with the urethane up to the fill line marked on the reservoir side. Attach the reservoir back to the spray gun and then turn on the gun's air compressor.4.
