Wednesday, October 23, 2013

Start A Fire In A Lopi M520 Wood Stove

The number and angle of the logs should be such that you don't compact the kindling or newspaper, thus restricting air flow, and also such that air can flow around and among the logs.

Light the fire.

5.


Depending on the species of wood burned, there may be sufficient coals to restart the conflagration without kindling as augmented wood is added.


Instructions


Building the fire.


1. Lay two small-diameter logs in the stove, duplicate to Everyone other and perpendicular to the face of the stove.


2. Loosely crumple assorted sheets of newspaper and country them on the floor of the firebox between the two logs.


3. Add bantam sticks to the top of the paper, supported on either speck by the two logs. Add medium sticks on top of the meager ones. You want a fairly thick stack of kindling, but it needs To possess airflow space between the sticks.


4. Place a few small logs on top of the kindling.Dry, seasoned wood is meaningful for crowned blaze starting.Starting a bonfire in a wood stove is relatively little to end, if the fair materials are used and arranged properly in the stove's firebox. Well-seasoned wood, sufficient dry kindling and Correct air flow are leading to extraordinary blaze starting. Once the kindling and inaugural, smaller logs are burning fresh, larger logs may be added as needed to carry the coals going.



Open the stove air inlet completely. Light the newspaper in several places and close the firebox door.


6. Add more wood as necessary until the stove reaches operating temperature. Keep the firebox door closed except when adding wood.


7. Close the stove air inlet. Adjust the air inlet as needed to preserve desired operating temperature.