Place the Intonation on a Fender Telecaster
It is impossible to play in tune provided the intonation is not properly place on your Telecaster. The guitar may sound in tune when you play on the anterior half of the guitar neck, however as you push higher up the neck the paper money Testament be sharp or Apartment lodgings. Deficient intonation is largely noticable when you play chords, over the Sole strings are not in tune with Everyone other. Setting the intonation on a Telecaster requires patience and developing a ambience for it. Provided you are a novice it is favorable To possess an experienced buddy guidance you the anterior infrequent times when you exertion to adjust the intonation.
Instructions
1. Degree the length of the fretboard with a measuring tape to complete the scale length of the Telecaster. Degree from the inside of the aficionado to the 12th fret. Banal this measurement to decide the scale length.
2. Adjust Everyone of the six parts of the bridge saddle to the scale length. Originate with the head list. Capo the first fret and depress the sixth string at the highest fret on the fretboard. Check the gap between the bottom of the depressed string and the eighth fret. The general rule is that the gap should be between .003 inches and .066 inches. Duty from the moment case to the sixth string. If the gauge of the second string is .011 inches, move the saddle bridge back .011 inches. Follow the same procedure for the remaining strings.
3. Degree the distance from the kernel to the centre of the bridge saddle. Account an Allen wrench to measure the basic border saddle bridge to assent with the scale length. Avail the contour gauge of the closest strings to fix the bridge saddles for the other strings. However, this may vary with the style and gauge of strings that are used on the guitar. Go to Fender.com to find a gauge diagram. Use the truss rod to make adjustments.
4. Adjust the truss rod with a truss rod tool. Purchase the truss rod tool at a guitar store. The truss rod is accessible in the headstock of the Telecaster above the nut. Adjust the truss rod with quarter turns. Turn the truss rod clockwise to diminish the gap and counterclockwise to increase it. Depress the sixth string at the last fret and examine the gap between it and the eighth fret each time you make a quarter turn.
5. Tune the Telecaster to standard tuning using an electric tuner. Check the intonation of the guitar with the electric tuner. Play each string open and at the 12th fret. If the string is in tune in the open position but sharp or flat at the 12th fret, the length of the string needs to be adjusted. Each saddle bridge has a screw in the back of the bridge plate that allows you to move the saddle bridge forward or backward. If the string is sharp, increase the length of the string by shortening the saddle bridge. Lengthen the saddle bridge if the string is flat.
